The status of luxury tsar bomba watches as heirloom-quality keepsakes is on par with that of more conventional keepsakes. People have a soft spot for watches with jewel-accented dials and suede bands because they bring back memories of loved ones. It is also possible to maintain these high-end timepieces properly.


Even if you don't live forever, a well-maintained Benyar mechanical watch will survive you for several generations. In addition, they may pass down through the generations as treasured relics brimming with history. You may recall a particular watchmaker saying, "You never genuinely own a Patek Philippe. All you have to do is protect it for future generations.


Yet hundreds of microscopic parts within these tiny machines work within incredibly tight tolerances to reliably produce the time even as they are subject to daily stresses like motion, shock, heat, and moisture.


Though we count on our watches to be accurate and dependable, even the most stalwart of timepieces will eventually show signs of wear and tear. Taking good care of your luxury watch will make the difference between it lasting a few years and surviving for centuries. Wear and tear are inevitable in any mechanism that uses friction in its operation.

Follow These Guidelines To Extend The Life Of Your Expensive Timepieces:

  1. Having A High Level Of Water Resistance Is Must!

There is a water-resistance rating on every watch (usually shown in atmospheres or depths of water), but don't jump out of a perfectly good airplane wearing it. A watch's 3 bar (3 ATM/30m/100ft) certification does not indicate it is watertight to that depth. Doing so is hazardous to your timepiece. These figures are based on a standardized water resistance categorization as opposed to actual usage conditions.

  1. Keep The Throne Safe!

As the sole barrier between your skin and the intricate workings within, the crown deserves your utmost care. To avoid damaging your watch, never place the crown on a hard surface; instead, lay it flat on a soft one while it's not being worn. It's not good for the watch's winding system if you wind it or adjust it while it's on your wrist since it puts lateral pressure on the springs. Take it off your wrist and wind it carefully, as this is how professionals do it.

  1. Do Not Approach Magnetic Objects!

In the worst situations, exposure to a magnetic field can completely disable a mechanical watch. That rules out using several convenient conveniences, such as speakers, freezers, and bag magnetic closures. You should also avoid keeping your watch near any electronic device with a powerful magnet because doing so might potentially damage it. You should get your watch demagnetized if you find that the hands are moving too slowly or too quickly.

  1. Protect From Bright Light!

As with expensive fragrances and rare liquors, direct sunlight can damage a high-end watch. Direct sunlight, especially for extended periods, can damage your watch by drying up the lubricants that keep the moving parts operating smoothly and speeding up the wear on painted areas (often the dial, bezel, and hands). Condensation and water damage can occur in certain watches, especially older ones, if they are subject to rapid temperature fluctuations. Protect your timepiece by storing it in a cool, dark place where the temperature won't vary too much.

  1. Make The Appropriate Time Adjustments!

Don't change the date or weekday between 9 p.m. and 3 a.m. if you can help it (although each movement has its own guidelines that might vary a little). The date's gear mechanism often kicks in at this time and doesn't entirely disengage until 3:00 in the morning. Adjusting this when in the danger zone might cause malfunctions in the machinery. The ideal solution is to just not check the time at all during that window, but you may also protect your automatic watch with a winder while it is not in use and make sure your manual watch is always fully wound.

  1. Wash Mildly!

Because of its long history of service to you, whether at work, at play, or anywhere in between, your watch will eventually lose its lustre and get covered in dirt and grime.


To clean, you can risk getting some water inside the case of a water-resistant watch. A soft, damp towel will do a good job of wiping it down, but if you really want to get down into the crevices, you'll need a wooden toothpick with a dampened end or an old toothbrush. You may also use cotton swabs, although they won't be as effective in cleaning tight spaces and may leave behind cotton fibers.


Don't even think of using hand soap here. A jeweller or watchmaker can give your watch a thorough cleaning if it's in very bad shape. Do not use paper towels, tissue paper, or other household textiles for this final step; instead, grab a microfiber cloth and wipe everything off without resorting to polishing agents.

Conclusive Results

All high-end timepieces should be maintained using these methods. But there are certain aspects that are unique to each watch, and those suggestions will include in the instruction manual.


Respect and attention must given to a high-end mechanical watch because of its high price tag and sentimental value. A treasured heirloom like that needs our tender loving care, and following these instructions will ensure that your watch lasts for generations to come.


Must Visit TheProwatches and buy Benyar Mechanical Watches for men. 

September 27, 2022 — WBO Solutions